T735 Telehandler for Rough Terrain Material Handling

1. Multi-Purpose, Fast Attachment Change
Equipped with a standard quick coupler, switch between forks, buckets, hooks, clamps, and more in seconds — no need to change machines from stacking to truck loading.

2. Telescopic Boom Reaches High & Far
Maximum lift height up to 18 meters, with horizontal reach far beyond ordinary forklifts. Easily handles rooftop work, pit placement, or cross-obstacle handling.

3. All-Terrain Off-Road Chassis
4-wheel drive, crab steering, and high ground clearance. Works stably on muddy sites, gravel roads, or snowy farms — unrestricted outdoor operation.

4. Precise Control & Wide Visibility
Panoramic cab with proportional hydraulic control enables millimeter-level positioning in tight spaces, reducing cargo damage and secondary handling.

5. Stable Heavy Loads & Safety Redundancy
Dynamic load control system + anti-tip protection. Automatically limits speed and boom angle when fully loaded on slopes or with unbalanced loads — safeguarding people and cargo.

1. High-Reach Work & Material Handling on Construction Sites
On multi-story construction sites, the telehandler uses its telescopic boom to lift blocks, mortar, or steel components directly to the third floor or above, while switching to a bucket for debris cleanup. One machine handles both vertical and horizontal material flow.

2. Agricultural Storage & Bale Stacking
On farms or in feed warehouses, the telehandler equipped with a bale clamp easily picks up large round or square bales and stacks them 5–6 layers high. After switching to forks, it can also move pallets of fertilizer or grain — true multi-purpose capability for seasonal needs.

3. Municipal Engineering & Road Maintenance
At road repair sites, the telehandler uses a hook to precisely lower curbstones or drainage pipes into trenches, then switches to a bucket for backfilling gravel. The 4WD chassis prevents getting stuck on soft shoulders, reducing the need for auxiliary equipment.

4. Mining & Heavy-Duty Yard Operations
In ore stockyards or bulk material warehouses, the telehandler leverages its high ground clearance and heavy lift capacity to unload large containers or equipment pallets from trucks, then reaches into narrow storage bins for placement — solving the problem of getting large loaders into tight spaces.

5. Snow Removal & Extreme Terrain Rescue
Fitted with a snow plow or spreader, the telehandler clears snow at ski resorts or remote farms. It can also switch to a rescue fork to transfer vehicles or livestock stuck in deep snow to safety — reliable all-weather operation even in low temperatures.

Maximizing operational efficiency requires equipment that adapts instantly to shifting demands. The T735 Telehandler is engineered with a suite of advanced features that prioritize versatility, safety, and unwavering performance across diverse industrial applications.

• Rapid Attachment Integration: Equipped with a standardized quick-coupling mechanism, operators can transition from heavy-duty forks to high-capacity buckets or bale clamps in mere seconds, eliminating costly downtime during multi-phase projects.

• Panoramic Visibility: The structurally reinforced, ROPS/FOPS certified cabin utilizes expansive, distortion-free safety glass. This eliminates blind spots, giving operators total visual command over the attachment and surrounding environment.

• Proportional Hydraulic Command: The intuitive joystick interface translates minute hand movements into fluid, precise boom actions. This tactile feedback prevents sudden jerks, protecting fragile cargo and ensuring accurate placement at maximum extension.

• Heavy-Duty Structural Integrity: The high-tensile steel boom incorporates advanced wear pads and reinforced pivot points, drastically reducing torsional stress during heavy lifts and extending the mechanical lifespan of the lifting arm.

When evaluating material handling solutions, the ultimate metric is the physical boundary of its operational envelope. This telehandler is specifically calibrated to conquer high-altitude and long-reach challenges that render conventional forklifts obsolete.

• Exceptional Vertical Lift: Achieving a maximum lifting height of 7000 mm, this machine effortlessly transports pallets of masonry, steel beams, or roofing materials directly to third-story scaffolding, streamlining vertical logistics.

• Superior Horizontal Extension: With a maximum external elongation of 2700 mm, operators can seamlessly place heavy loads across trenches, over retaining walls, or deep into the bed of flatbed trailers without repositioning the base unit.

• Uncompromising Load Capacity: Rated for a robust 3500 kg maximum capacity, it handles dense, heavy materials with absolute stability, ensuring that high-volume material transfer is executed swiftly and securely.

The beating heart of any industrial machinery lies in its internal components. To guarantee relentless performance and minimize the risk of mechanical failure, this unit integrates only the most respected, globally recognized engineering components.

• Italian Carraro Drivetrain: Featuring a Carraro axle and gearbox, the power transmission is exceptionally smooth and durable. This premium gearing ensures optimal torque delivery to the wheels, minimizing wear during high-friction operations.

• German Rexroth Hydraulics: The travel pump, travel motor, and tooling pump all utilize Rexroth 71 displacement technology. This guarantees a consistent, high-pressure fluid flow, resulting in unwavering lifting power and rapid cycle times.

• Precision Valve Control: Equipped with Rexroth working and balance valves, the hydraulic system maintains perfect pressure equilibrium. This prevents boom drift under heavy loads and ensures smooth, controlled descent even in the event of sudden pressure fluctuations.

Outdoor operations rarely present ideal ground conditions. This machine is engineered to dominate unforgiving landscapes, ensuring that weather and terrain never dictate your project schedule.

• Turbocharged Powerplant: Driven by the QSB3.9-C100 turbocharged engine, it delivers a formidable 74 kW of power at 2400 r/min. This ensures rapid acceleration and sustained pushing force, even when fully loaded on steep inclines.

• Unrestricted Mobility: The advanced 4-wheel drive system, coupled with crab steering capabilities, allows the machine to maneuver diagonally out of deep ruts or navigate tightly confined storage yards with unparalleled agility.

• High Ground Clearance: Boasting a minimum ground clearance of 400 mm and aggressive 400/70-24 tires, the chassis effortlessly glides over rocky debris, thick mud, and snow-covered fields without the risk of high-centering or undercarriage damage.

Capital investment demands maximum utilization. By transforming a single prime mover into a multi-purpose fleet, this equipment significantly amplifies your operational return on investment.

• Construction Site Mastery: Seamlessly switch from lifting palletized concrete blocks with forks to clearing site debris with a heavy-duty bucket, maintaining continuous workflow from foundation laying to final cleanup.

• Agricultural Efficiency: In agricultural settings, attach a specialized clamp to stack large round bales up to six layers high, or utilize a grain bucket for rapid feed distribution, adapting effortlessly to seasonal demands.

• Municipal & Infrastructure: Utilize a lifting hook to precisely lower drainage pipes or curbstones into deep trenches, then instantly swap to a bucket for gravel backfilling, eliminating the need to mobilize separate excavators and loaders.

In high-stakes industrial environments, safety cannot be an afterthought. This telehandler is fortified with intelligent systems designed to protect both the operator and the valuable cargo being transported.

• Dynamic Load Monitoring: An intelligent onboard system continuously calculates the load weight against the boom angle and extension. If the machine approaches its 1700 kg maximum tipping load threshold, it automatically restricts further dangerous movements.

• Anti-Tip Redundancy: The low center of gravity combined with active anti-tip protection ensures that the chassis remains firmly planted, even when operating on mild slopes or handling asymmetrically balanced loads.

• Millimeter-Level Accuracy: The integration of proportional hydraulic valves allows the operator to feather the controls. This translates to micro-adjustments during the final stages of load placement, drastically reducing the risk of impact damage to fragile materials.

Minimizing total cost of ownership requires equipment that is as easy to maintain as it is to operate. We have engineered this machine to ensure routine servicing is swift, accessible, and straightforward.

• Accessible Service Points: The engine bay and hydraulic compartments feature wide-opening cowlings, providing ground-level access to the 130 L diesel tank, 130 L hydraulic tank, and all primary filtration systems.

• Simplified Boom Upkeep: The telescopic boom is designed with easily accessible lubrication points and replaceable wear strips. Daily inspections and greasing take mere minutes, preventing joint jamming and ensuring smooth, uniform extension.

• Reliable Component Sourcing: Because the machine utilizes standardized, globally recognized components like Carraro and Rexroth, sourcing replacement parts is highly efficient, minimizing potential downtime and keeping your operations running smoothly.

Selecting the right equipment partner is just as critical as the machinery itself. As a dedicated manufacturer and global supplier, we are committed to delivering engineering excellence and uncompromising support to our industrial clients.

• Rigorous Quality Assurance: Every unit undergoes exhaustive stress testing, hydraulic pressure evaluations, and real-world terrain simulations before leaving our facility, guaranteeing out-of-the-box reliability.

• Direct-from-Manufacturer Value: By streamlining the supply chain, we eliminate unnecessary markups. This allows us to offer premium, heavy-duty machinery equipped with top-tier European components at highly competitive price points.

• Comprehensive Technical Support: Our team of specialized engineers provides extensive operational guidance, maintenance protocols, and rapid-response troubleshooting, ensuring your equipment maintains peak performance throughout its lifecycle.

• Tailored Industry Solutions: We understand that a mining operation has different requirements than a commercial farm. Our experts work closely with procurement teams to configure the ideal attachment packages and specifications for your exact application.