Compact Diesel Wheel Loader for Construction Sites

Sourced directly from a premier manufacturer, this compact diesel wheel loader is engineered to transform heavy-duty material handling in confined environments. As a trusted supplier, we deliver equipment that balances raw mechanical power with precise agility, ensuring optimal performance across diverse operational sites.

• High-torque 37kW diesel engine for relentless power

• 0.6 m³ heavy-duty reinforced bucket for maximum throughput

• Articulated fully hydraulic steering for superior navigation

• 2530 kg operating weight ensuring exceptional lifting stability

  
  

Step into a new tier of earthmoving proficiency with our compact diesel wheel loader, meticulously crafted for the most demanding site conditions. When you approach this machine, the robust, powder-coated steel chassis immediately communicates industrial-grade resilience, designed to shrug off the daily abrasions of gravel, sharp debris, and harsh weather elements. Ignite the engine, and the deep, steady hum of the 37kW powertrain reveals a machine ready to conquer steep inclines and heavy payloads without a moment of hesitation. The tactile feedback of the hydraulic joystick is exceptionally smooth, allowing operators to execute precise lifting, tilting, and dumping motions with minimal physical exertion, while the quiet operation protects the operator's hearing over long shifts.

Every weld, joint, and pivot point has been engineered to absorb the punishing vibrations of rough terrain, ensuring that the structural integrity remains uncompromised over thousands of operating hours. By integrating a micro turning radius with formidable breakout force, this loader eliminates the logistical nightmares of navigating cramped construction zones, narrow agricultural aisles, or congested material yards. This seamless blend of compact geometry and aggressive power directly translates into faster project completion times, fewer machine repositioning maneuvers, and a significant reduction in manual labor costs.

Brand engine: High horsepower brand engine, powerful, fuel-efficient and durable, with low noise.

Engineering specific tires: Long service life, deep tread, anti slip and wear-resistant, not afraid of terrain, strong grip.

Heavy duty axle: Strong transmission of force and torque, not easily deformed under load, stable performance.

Bold hydraulic cylinder: Strong sealing, hydraulic lifting, strong power, large load-bearing capacity, quick recovery, long service life.

Large capacity bucket: High horsepower brand diesel engine, powerful and efficient, low fuel consumption, can work for a long time, fuel-efficient tool.

1. Construction sites
Including building construction, road and bridge construction, water conservancy engineering, etc.

2. Mines and quarries
Open pit coal mines, metal mines, sand and gravel yards, etc.

3. Farmland and agricultural bases
Leveling of farm land, loading and unloading of sugarcane/timber, and transportation of grain storage.

4. Maintenance of urban infrastructure
Environmental sanitation department (winter snow removal), port terminals, train stations, large freight yards.

5. Inside factories and enterprises
Factory areas such as cement plants, steel plants, and chemical plants that require a large amount of raw material turnover.

Maximize operational uptime and material throughput with engineering that prioritizes functional supremacy. This equipment is not just a standard vehicle; it is a comprehensive solution designed to streamline bulk material management and elevate your daily operational capabilities.

• Exceptional Ground Adhesion: Deep-tread engineering tires bite into muddy, uneven, or loose surfaces, preventing slippage and ensuring continuous forward momentum.

• Rapid Cycle Times: The optimized hydraulic flow guarantees swift bucket lifting and retracting, dramatically accelerating the pace of repetitive loading tasks.

• Unwavering Load Stability: A precisely calculated wheelbase and track width prevent tipping, even when the 0.6 m³ bucket is fully loaded at maximum elevation.

• All-Weather Resilience: Sealed electrical connectors and corrosion-resistant hydraulic lines ensure peak performance through rain, snow, and extreme ambient temperatures.

• Intuitive Operation: The ergonomic control layout flattens the learning curve, enabling new operators to achieve maximum productivity with minimal training hours.

The heartbeat of this compact loader is a high-horsepower, low-emission diesel engine that redefines site productivity. We understand that equipment downtime is a direct hit to project profitability, which is why the powertrain is engineered for relentless endurance and smooth power delivery.

• 37kW YN25GB Engine: Delivers a surge of raw torque exactly when the bucket hits a dense pile of aggregate, preventing engine stalls and maintaining aggressive digging momentum.

• Powershift Transmission: Seamlessly transitions between speed gears without interrupting power delivery, offering a fluid driving experience that significantly reduces mechanical wear and tear.

• Dual Front and Rear Drive (4WD): Distributes tractive effort evenly across all four wheels, allowing the machine to power through deep mud and conquer 25° inclines with a full payload.

• Optimized Fuel Economy: Precision fuel injection maximizes the energy extracted from every drop of the 47.5L diesel tank, drastically lowering daily operational fuel expenses.

Space is a premium asset on modern job sites. This loader is architected to perform heavy-duty tasks in spatial constraints where conventional machinery simply cannot operate, turning logistical bottlenecks into highly streamlined workflows.

• Articulated Fully Hydraulic Steering: The chassis pivots smoothly in the middle, allowing the front end to snake around obstacles with surgical precision and minimal effort.

• 2600mm Micro Turning Radius: Effortlessly executes tight U-turns in narrow warehouse aisles, greenhouse pathways, and highly congested urban construction zones.

• 32° Maximum Steering Angle: Provides exceptional lateral flexibility, enabling operators to position the bucket perfectly against walls or inside transport trucks without repeated reversing.

• Responsive Hydraulic Feedback: The steering wheel offers immediate, predictable resistance, ensuring operators feel completely connected to the machine's movements in tight quarters.

Your return on investment hinges on how quickly and safely materials can be moved from point A to point B. Every dimensional parameter of this loader has been carefully calibrated to maximize the volume of material transferred per hour.

• 3300mm Maximum Lifting Height: Easily clears the sideboards of high-capacity dump trucks and agricultural feed mixers, eliminating the need for secondary handling ramps.

• 2400mm Unloading Clearance: Ensures clean, unobstructed dumping of sticky materials like wet soil or manure without damaging the receiving vehicle or spilling over the edges.

• 800kg Rated Load Capacity: Confidently hoists heavy pallets of bricks, dense gravel, or soaked timber without compromising the machine's center of gravity.

• 0.6 m³ High-Capacity Bucket: The 1580mm wide bucket scoops massive volumes in a single pass, drastically reducing the total number of trips required to clear a site.

To maximize asset utilization, a machine must adapt to shifting seasonal and project demands. This loader serves as a universal tool carrier, eliminating the financial burden of purchasing multiple single-purpose pieces of equipment.

• Universal Quick-Hitch System: Allows operators to swap out the standard bucket for specialized attachments in minutes, without requiring specialized hand tools or extensive downtime.

• Agricultural Adaptability: Effortlessly transitions from leveling farm land to loading sugarcane, handling heavy timber, or distributing livestock feed across large pastures.

• Municipal Maintenance: Instantly converts into a powerful snow clearing machine for winter sanitation, or a material handler for port terminals and train stations.

• Industrial Material Handling: Perfectly suited for the relentless raw material turnover required in cement plants, steel mills, and chemical processing facilities.

Heavy machinery must endure brutal physical punishment day in and day out. We have over-engineered the critical stress points of this loader to guarantee a long, profitable service life under the most unforgiving environmental conditions.

• Heavy-Duty 50 Axle: Forged from high-tensile steel, this axle withstands immense downward pressure and torsional twisting without deformation, ensuring long-term alignment.

• Oversized Hydraulic Cylinders: Featuring premium industrial seals, these thick cylinders deliver massive lifting force while preventing fluid leaks and pressure drops under maximum load.

• Reinforced Boom Arms: Constructed with thickened steel plating to resist the severe bending forces generated during aggressive digging and prying operations.

• Deep-Tread Construction Tires (12-16.5): Engineered with a specialized rubber compound that resists punctures from sharp rocks, rebar, and abrasive industrial debris.

An exhausted operator is a liability to both safety and productivity. By prioritizing ergonomics and environmental protection within the cabin, this loader ensures that operators remain alert, precise, and safe throughout extended operational shifts.

• Vibration Isolation Mounting: The entire cabin structure is mounted on shock-absorbing dampeners that isolate the operator from the jarring impacts of rough, unpaved terrain.

• Panoramic Visibility: Expansive, shatter-resistant glass provides unobstructed sightlines to the bucket edges and the surrounding site, drastically reducing the risk of blind-spot accidents.

• Gas Cap Oil Clamp Disc Brakes: Delivers immediate, fade-resistant stopping power, ensuring total control when descending steep grades with heavy loads.

• Ergonomic Joystick Controls: Placed precisely at the operator's natural resting hand position to eliminate shoulder and wrist strain during repetitive, high-frequency loading cycles.

Minimizing the total cost of ownership requires maintenance protocols that are swift and straightforward. We have designed this loader so that routine servicing never becomes a logistical nightmare that delays your daily operations.

• Ground-Level Access Points: Engine oil dipsticks, hydraulic fluid reservoirs, and air filters are easily accessible without the need for dangerous climbing or specialized ladders.

• Wide-Opening Engine Hood: Provides mechanics with unrestricted, panoramic access to the engine bay, cutting diagnostic and repair times in half.

• Standardized Component Architecture: Utilizes universally recognized hydraulic and electrical parts, ensuring that replacement components can be sourced rapidly to minimize downtime.

• Comprehensive Technical Backing: Supported by a dedicated engineering team ready to provide rapid troubleshooting, maintenance guidance, and operational optimization advice.

Q: How does the articulated steering system specifically benefit operations in confined warehouses?

A: The articulated joint allows the front chassis to pivot independently of the rear. This creates a sweeping motion that drastically reduces the turning radius to just 2600mm, enabling the loader to navigate narrow warehouse aisles and sharp corners without requiring the wide, sweeping turns that traditional rigid-frame loaders need.

Q: Can the hydraulic system handle continuous, high-intensity operations without overheating?

A: Yes. The system operates at a robust 18 Mpa pressure and is paired with a high-capacity 47.5L hydraulic oil tank. This large fluid volume, combined with an optimized thermal dissipation design, ensures the hydraulic fluid remains at optimal operating temperatures even during continuous, heavy-duty lifting and dumping cycles.

Q: What makes the YN25GB engine suitable for dusty construction and agricultural environments?

A: The 37kW YN25GB engine is equipped with a heavy-duty air filtration system designed specifically for high-particulate environments. This prevents abrasive silica dust, chaff, and debris from entering the combustion chamber, significantly extending the engine's lifespan and maintaining consistent torque output.

Q: Is the powershift transmission difficult for new operators to master?

A: Not at all. The powershift transmission is engineered for highly intuitive operation, allowing seamless gear changes without the need for a manual clutch. This fluid power delivery reduces the cognitive load on the operator, allowing them to focus entirely on bucket positioning and site safety, thereby accelerating the training process.

Q: What type of maintenance schedule is required for the heavy-duty 50 axle?

A: The heavy-duty 50 axle is designed for exceptionally low maintenance. It requires standard periodic lubrication of the articulation joints and regular inspection of the differential fluid levels. Because it is forged from high-tensile steel to resist heavy load deformation, it avoids the frequent alignment and repair issues common in lighter, inferior axles.